Praise God! The TBLTETMO data fix finally works!
What is this for?
-These data fix zips allow you to use a TBLTEXX rom on your phone (provided that you can flash it, see “flashing tbltexx roms” for details on that). If you edit a TBLTEXX rom and flash it to your phone, you will not be able to use the cellular, but now you can with these data fix zips!
THIS IS FOR THE 6.0.1 BOOTLOADER ONLY! THIS ONLY WORKS ON ROMS BUILT FOR THE TBLTEXX ON THE 6.0.1 BOOTLOADER! PLEASE USE WITH CAUTION!
Flashing TBLTEXX roms:
You have two choices, either flash a TBLTEXX recovery, so you can flash TBLTEXX roms, or you can use a TBLTETMO recovery and follow the steps below.
1. Download the TBLTEXX rom that was built using the 6.0.1 bootloader.
2. Unzip the rom.
3. Open ./META-INF/com/google/android/updater-script in gedit or notepad++.
4. Delete the first line – should say something like
[CODE]assert(getprop(“ro.product.device”) == “tblte” || getprop(“ro.build.product”) == “tblte” || getprop(“ro.product.device”) == “tbltexx” || getprop(“ro.build.product”) == “tbltexx” || getprop(“ro.product.device”) == “tbltedt” || getprop(“ro.build.product”) == “tbltedt” || abort(“E3004: This package is for device: tblte,tbltexx,tbltedt; this device is ” + getprop(“ro.product.device”) + “.”););[/CODE]
5. Save the file.
6. zip the contents back up.
Mickey387 – For continued development for the TBLTEXX!
louforgiveno – For making the 5.1.1 bootloader data zips for the trlte, which inspired this set of datazips. (Same principle, different files.)
Known working TBLTEXX roms:
[ROM][7.1.1] AOKP Nougat with built in sidebar launcher! [tbltexx]
This rom is available in the T-Mobile thread also for direct use on the T-Mobile phones!
Instructions: After downloading this, you do not need to edit the zip, it is ready for flashing, flash rom, gapps. Reboot, let it settle, then, go back into recovery and flash datazip #1. Reboot. Now you will see your cell phone signal as empty, select your apn, and set your phone to 3g mode. Then, after you get the H+ by your cell signal, you can switch back to LTE.
[ROM][OFFICIAL]NOUGAT Resurrection remix 5.8.0 (7.1.1)
Instructions: After making it flashable, flash rom, gapps. Reboot, let it settle, then, go back into recovery and flash datazip #1. Reboot. Now you will see your cell phone signal as empty, select your apn, and set your phone to 3g mode. Then, after you get the H+ by your cell signal, you can switch back to LTE.
[rom][6.0.1] aokp mm [n915t/n915f/n915fy/n915g]
Instructions: After downloading the 6.0.1 bootloader version, you do not need to edit the zip, it is ready for flashing. Flash the rom, the gapps, and reboot. After it boots up the first time, go back to recovery and flash data zip #1. You should be good to go! If you have trouble, choose your apn, cycle between 3g and lte!
finnigen2 found that this also works with Resurrection remix 5.8.1 (7.1.1) with the data fix with Mickey’s TWRP 22.214.171.124_915F.
unimatrix725 found that this also works with TekX EPE2 [6.0.1] on a SM-N915R4 (U.S. Cellular).
JeremySS found that if you upgrade from TBLTEXX RR 5.8.0 to 5.8.1, you can flash data zip 2 to fix your issues.
The data zips.
You can also check it out on XDA: https://forum.xda-developers.com/note-edge/tmobile-note-edge-android-development/ril-data-fixes-6-0-1-bootloader-t3546110
Linux – keep it simple.